Siding in Westborough, MA

When the siding on your Westborough home shows its age, you want a crew that knows the houses here and the weather they face. This page explains what a siding replacement involves for the colonials, capes, ranches and split-levels common in town, the materials that hold up to New England winters, and how the job runs from the first measurement to the final walk-through.

What a siding replacement involves on a Westborough house

Most homes in Westborough are wood-framed colonials, capes and ranches where old siding hides more than it shows. A proper replacement starts with a full tear-off down to the sheathing so we can find and fix rot, carpenter ant damage or gaps that let water into the wall cavity. On houses built before 1978, Massachusetts law requires lead-safe containment: plastic sheeting on the ground, a HEPA vacuum on the saw and a wipe-down of the work area at the end of each day.

Once the sheathing is sound, the crew wraps the house with a weather-resistive barrier, tapes the seams and installs flashing at windows, doors, corners and the bottom of the wall. This layer keeps wind-driven rain out while letting the wall dry to the outside. Here is the step-by-step sequence on a typical Westborough house:

• Remove the existing siding, corner boards and trim, and inspect the OSB or plank sheathing for rot or insect damage.
• Replace any soft or compromised sheathing and nail off loose boards so the wall plane is flat and solid.
• Seal the window and door openings with flexible flashing tape, then wrap the house with a code-approved weather barrier, lapping the courses shingle-style.
• Flash the bottom of the wall with a metal or PVC starter strip and add head flashing above every window and door.
• Install rigid foam insulation over the sheathing on request, then fasten the new siding according to the manufacturer’s wind-load table for our climate zone.
• Set the new PVC or wood trim, caulk the perimeter of the openings and leave the site clean for the town inspector’s visit.

Siding materials that work in a Massachusetts climate

Fiber cement, vinyl, polymer shakes, composite and cedar all hold up here with proper flashing and house wrap. James Hardie fiber cement resists rot and freeze-thaw cracking, CertainTeed vinyl and Cedar Impressions polymer shakes shrug off wind-driven rain, and Everlast and Ascend composites suit colonials, capes and ranches around Westborough.

• Fiber cement offers a painted finish that stays stable through wet winters and hot summers.
• Vinyl lap siding is a practical choice for two- and three-family homes.
• Polymer shakes give a cedar look without the upkeep of real wood.

How the project runs from measurement to walk-through

We start with a free visit. The project manager measures every wall, checks the existing siding and sheathing, and notes the trim, corners and any areas that need repair. You get a written proposal listing the exact siding product, color, trim profile and scope of work. No surprises later.

Once you approve the proposal we pull the Westborough building permit and order the materials. The crew on our payroll handles the tear-off, sheathing repair, house wrap, flashing and installation, then hauls away every piece of debris. At the end we walk the finished job with you to confirm the details match our agreement.

What to check in a siding quote

Two quotes for the same house can differ because one leaves out work that the other includes. Before you compare numbers, check that each estimate spells out the full scope, not just the siding itself.

• Tear-off and disposal of the old siding and debris.
• Sheathing repair if rotten boards turn up after removal.
• House wrap and flashing at windows, doors and corners.
• Trim, soffits and fascia, listed with the exact materials.
• Who pulls the building permit and schedules town inspections.