Siding in Wellesley, MA

Replacing siding on a Wellesley house means choosing a material that handles New England winters, keeps its look through wet springs, and fits the architectural character of your neighborhood. We work with fiber cement, vinyl, polymer shakes, composite and cedar, and every job follows the same steps: a measured proposal, the town permit, tear-off and sheathing repair, and installation by our own crew.

What siding replacement involves on a Wellesley house

On a Wellesley house, siding replacement starts with removing the old cladding down to the sheathing. Our crew strips every layer so we can inspect the OSB or plywood underneath. In houses built before 1978, we follow the Massachusetts lead-safe renovation rules: the work area is contained, and a lead-safe certified renovator runs the job.

• Tear off all existing siding, trim and any degraded building paper.
• Inspect and replace rotted or delaminated sheathing, then fasten the wall to the framing per code.
• Install a continuous WRB house wrap and flash all windows, doors and corner boards with tape.
• Replace trim boards with AZEK PVC where needed before the new siding goes on.
• Add a layer of rigid foam insulation when the wall assembly calls for it, sealed for air tightness.

The Town of Wellesley requires an inspection at the rough stage and again at completion. We handle the building permit, schedule the inspections, and keep the site clean through every step.

Siding materials that work in this climate

Wellesley winters push siding through constant freeze-thaw cycles, and nor'easters drive rain sideways at the walls. James Hardie fiber cement holds its shape through both, which is why it suits the colonials and capes common here. CertainTeed vinyl and Cedar Impressions polymer shakes resist moisture and never need painting, and AZEK composite trim works well where trim and siding meet.

• Fiber cement handles wind-driven rain and fire, and it holds paint color well.
• Vinyl and polymer shakes stay stable through freeze-thaw cycles and clean up with a hose.
• Cedar suits historic district review near the town center, though it needs periodic painting.

How the project runs from measurement to walk-through

The project manager visits your Wellesley home to measure every wall and discuss the siding style and color you want. You receive a written proposal that lists the exact products, trim, and scope so there is no guesswork later.

• We pull the building permit with the Town of Wellesley and schedule the required inspections.
• Materials are ordered to match your proposal, from the siding profile to the flashing and house wrap.
• Our in-house crew handles the tear-off, sheathing repair, installation and trim work without subcontractors.
• Each day ends with a cleanup: debris loaded, nails swept, walkways clear.
• A final walk-through with the project manager confirms every detail is finished as we agreed.

The same sequence applies whether you choose fiber cement lap siding or polymer shakes. The permit process keeps the work in line with the Massachusetts building code.

What to look for in a siding quote

A complete proposal spells out the work in writing so you can compare bids line by line. Before you sign, check that the proposal covers the details below.

• The exact product, style and color, named by brand and line.
• Whether tear-off, disposal and house wrap are included in the scope.
• How sheathing repairs are handled if rot is found behind the old siding.
• Trim, corner boards, and flashing at windows, doors and roof lines.
• Who pulls the permit with the town and schedules the inspections.
• Daily cleanup and a final walk-through with the crew lead.